Raspberry Pints TargetΒΆ
The Raspberry Pints page allows you to forward pours to an MQTT-enabled Raspberry Pints installation. The settings are as follows:
Broker Address: [Required] Enter the fully-qualified domain name of the Raspberry Pints target. You may use *.local addresses, IP addresses, or Internet-facing addresses.
Broker Port: [Required] The port to use, the default MQTT port is 1883.
User Name: [Optional] If required by the MQTT broker, this is the user name by which you will be authenticated. Clear if not needed.
Password: [Optional] If required by the MQTT broker, this is the password with which you will be authenticated. Clear if not needed.
Topic: [Required] The topic to which the pours will be published.